It is designed to be mounted on the inside of the molds of extruder pipe machines, on the nozzle of injections for processing anf making plastic raw materials.
This heater can be tested idle.
It is produced in the form of cylindrical pipes.
It is produced according customer's demand.
|Diameter :||Min. Ø50mm - Max. 400mm.|
|Length:||Min 30mm - Max. 1000mm.|
|Wattage :||Max. 6,5 W/cm²|
|Working Temperature:||550 °C|
|Housing Material:||Stainless Steel|
|Insulation Material:||Max.1200 °C steatit|
|Resistance Winding Wire:||80/20 NiCr 1200°C|
|Energy Connection :||Ni GLS Cable Resistant to 400ºC|