Split Sheat industrial heater is designed especially for molds where the holes are poorly drilled or worn through age. Independent expansion of each section of the siplit sheat heaters when energized, creates intimate contact with the wall of the hole.
These resistances cannot be tested idle. It must be installed and operated in a way to ensure heat transfer.
It is produced according customer's demand.
|Sheath Material:||Stainless steel 1.4302|
|Resistance winding wire:||80/20 NiCr 1200°C|
|Max. Sheath temperature:||750°C|
|Watt:||Max. 15 W/cm²|
|High voltage test:||1500V|
|Insulation resistance:||≥ 5 MΩ at 500V|
|Thermocouple Options:||J and K|
|Cable options:||Nickel Cable, Silicone cable, PTFE cable|
Unenergized split sheat cartridge heater
Energized split sheat cartridge heater