Mika Insulated Band Heater

It is designed as high efficiency and long life band heater for processing and making of plastic raw materials, extruder machines, in textile and packaging industries. This heater cannot be tested idle. In order to operate, it must be installed in such a way that heat transfer is ensured.

These band heaters are mainly used in machines with protection guards and in output molds.

It is produced according customer's demand.

Technical Specification  
Diameter :  Min. Ø50mm 
Length:  Min 30mm
Voltage: 230/400 V
Wattage : Max. 3,5 W/cm²
Wall Thickness: 3,5mm
Working Temperature:  300 °C
Housing Material: Stainless Steel or Aluminised Sheet
Insulation Material:  800-1000 °C Mikanite
Resistance Winding Wire:  60/15 NiCr 1200°C 
Energy Connection :  Ni GLS Cable Resistant to 400ºC or plug sockets